Our original and patented process of creating a custom fingerprint wedding band with your loved one’s finger length print wrapped around the interior of the ring.  The subtle lines of your loved one’s finger forever touching your skin as a reminder of what makes them unique and special to you.

A modern look exterior accomplished by hand carving the outside of the band, then shaping and polishing the edges punctuated by a matte finish center, and a blackened interior print.

The pictured ring is palladium.

For information about the current turnaround time, the process by which your ring is made, international orders, expediting your order, shipping, and the materials we do and do not work in, please see our shop policies!
http://www.brentjess.com/policies/

**We stamp our Makers’ Mark as well as the Quality stamp on the inside of all our rings-
The stamps do not get placed on the fingerprint.*

The Fine Print– The design or finish on the exterior of any ring is vulnerable to scratching and wear over any period of time, especially sterling silver. If you are concerned about wear, consider purchasing a ring with the fingerprint on the interior.  All of the metals scratch and dent; exterior high polish or brushed finish can be refreshed with polishing or brushing. An oxidized finish allows the details of the fingerprint to stand out by blackening the crevices. Vigorous polishing and cleaning can remove this finish. We stamp our Maker’s Mark and Quality Stamp on all rings–these stamps are not placed on the fingerprint.

Only available from brent&jess, handcrafted by us on the Coast of Maine.

Please contact us for prices in those metals and include your ring sizes.

For us this is the ring that started it all! The fingerprint of your loved one from the tip to the hand, wrapped around the inside of a sterling silver band.

This listing is for two sterling silver fingerprint wedding bands, one approximately 6mm wide and one approximately 3mm wide, with single fingerprint wrapped around the inside.
Finished width has variation because each is handmade.

Pictured with an oxidized interior and brushed finish.

For information about engraving, the current turnaround time, the process by which your ring is made, international orders, expediting your order, shipping, and the materials we do and do not work in, please see our shop policies!
http://www.brentjess.com/policies/

**We stamp our Makers’ Mark as well as the Quality stamp on the inside of all our rings-
The stamps do not get placed on the fingerprint.*

The Fine Print– The design or finish on the exterior of any ring is vulnerable to scratching and wear over any period of time, especially sterling silver. If you are concerned about wear, consider purchasing a ring with the fingerprint on the interior.  All of the metals scratch and dent; exterior high polish or brushed finish can be refreshed with polishing or brushing. An oxidized finish allows the details of the fingerprint to stand out by blackening the crevices. Vigorous polishing and cleaning can remove this finish. We stamp our Maker’s Mark and Quality Stamp on all rings–these stamps are not placed on the fingerprint.

Only available from brent&jess, handcrafted by us on the Coast of Maine.

Please contact us for prices in those metals and include your ring sizes.

For us this is the ring that started it all! The fingerprint of your loved one from the tip to the hand, wrapped around the inside of a sterling silver band.

This listing is for one sterling silver 6mm fingerprint wedding band with single fingerprint wrapped around the inside.

Pictured with an oxidized interior and brushed finish.

For information about engraving, the current turnaround time, the process by which your ring is made, international orders, expediting your order, shipping, and the materials we do and do not work in, please see our shop policies!
http://www.brentjess.com/policies/

**We stamp our Makers’ Mark as well as the Quality stamp on the inside of all our rings-
The stamps do not get placed on the fingerprint.*

The Fine Print– The design or finish on the exterior of any ring is vulnerable to scratching and wear over any period of time, especially sterling silver. If you are concerned about wear, consider purchasing a ring with the fingerprint on the interior.  All of the metals scratch and dent; exterior high polish or brushed finish can be refreshed with polishing or brushing. An oxidized finish allows the details of the fingerprint to stand out by blackening the crevices. Vigorous polishing and cleaning can remove this finish. We stamp our Maker’s Mark and Quality Stamp on all rings–these stamps are not placed on the fingerprint.

Only available from brent&jess, handcrafted by us on the Coast of Maine.

*

Please contact us for prices in those metals and include your ring sizes.

A truly unique set of wedding bands that you won’t find in a catalog or mall jewelry store!

Two sterling silver bands, one 6mm, one 3mm, both with a single fingerprint wrapped around the exterior NOT blackened.

This set is available in gold, platinum, palladium, and each ring in the set can be customized.

For information about engraving, the current turnaround time, the process by which your ring is made, international orders, expediting your order, shipping, and the materials we do and do not work in, please see our shop policies!
http://www.brentjess.com/policies/

The Fine Print– The design or finish on the exterior of any ring is vulnerable to scratching and wear over any period of time, especially sterling silver. If you are concerned about wear, consider purchasing a ring with the fingerprint on the interior.  All of the metals scratch and dent; exterior high polish or brushed finish can be refreshed with polishing or brushing. An oxidized finish allows the details of the fingerprint to stand out by blackening the crevices. Vigorous polishing and cleaning can remove this finish. We stamp our Maker’s Mark and Quality Stamp on all rings–these stamps are not placed on the fingerprint.

Only available from brent&jess, handcrafted by us on the Coast of Maine.

Please contact us for prices in those metals and include your ring sizes.

A truly unique set of wedding bands that you won’t find in a catalog or mall jewelry store!

Your loved ones actual finger texture wrapped around the exterior. No blank space.

The entire finger texture from tip to palm wrapped around the exterior.

Follow this link to “THE original” where the print is wrapped INSIDE.

Follow this link to see this ring without blackened.

The pictured ring shows 1 approximately 6mm wide ring with single finger length print wrapped around the outside, blackened.

Please note, each ring is handmade, there are slight variations in the hand finished width.

Please let us know your ring sizes.

For information about engraving, the current turnaround time, the process by which your ring is made, international orders, expediting your order, shipping, and the materials we do and do not work in, please see our shop policies!
http://www.brentjess.com/policies/

The Fine Print– The design or finish on the exterior of any ring is vulnerable to scratching and wear over any period of time, especially sterling silver. If you are concerned about wear, consider purchasing a ring with the fingerprint on the interior. All of the metals scratch and dent; exterior high polish or brushed finish can be refreshed with polishing or brushing. An oxidized finish allows the details of the fingerprint to stand out by blackening the crevices. Vigorous polishing and cleaning can remove this finish. We stamp our Maker’s Mark and Quality Stamp on all rings–these stamps are not placed on the fingerprint.

Only available from brent&jess, handcrafted by us on the Coast of Maine. These rings are completely custom and are sure to be memorable and lasting.

Please contact us for prices in those metals and include your ring sizes.

A truly unique set of wedding bands that you won’t find in a catalog or mall jewelry store!

This listing is for two custom 6mm fingerprint tip rings in sterling silver. Just the center of the end of your finger–the whorl or loop–is used. Please see the blue image for a description.

The pictured set shows 2 approximately 6mm wide rings with single fingertip whorl print on the outside, blackened, with high polish finish on the outside. The high polish is recommended for contrast with the print.

Please note, each ring is handmade, there are slight variations in the hand finished width.

Also note that the orientation of the finger tip may vary to allow for the best sue of the print in the space of the ring.

Please let us know your ring sizes.

For information about engraving, the current turnaround time, the process by which your ring is made, international orders, expediting your order, shipping, and the materials we do and do not work in, please see our shop policies!
http://www.brentjess.com/policies/

The Fine Print– The design or finish on the exterior of any ring is vulnerable to scratching and wear over any period of time, especially sterling silver. If you are concerned about wear, consider purchasing a ring with the fingerprint on the interior. All of the metals scratch and dent; exterior high polish or brushed finish can be refreshed with polishing or brushing. An oxidized finish allows the details of the fingerprint to stand out by blackening the crevices. Vigorous polishing and cleaning can remove this finish. We stamp our Maker’s Mark and Quality Stamp on all rings–these stamps are not placed on the fingerprint.

Only available from brent&jess, handcrafted by us on the Coast of Maine. These rings are completely custom and are sure to be memorable and lasting.

Please contact us for prices in those metals and include your ring sizes.

This is the ring that started it all! The fingerprint of your loved one from the tip to the hand, wrapped around the inside of a sterling silver band.

Traditional on the outside, extraordinarily special on the inside!

Hers 3mm wide, his 6mm wide.

Exterior finished in high polish.

This matching set has an exterior with a comfortable half round shape that we have shaped by hand. Otherwise known as “court” shape or “D” shape.

The pictured set as priced is two sterling silver fingerprint wedding bands, one approximately 6mm wide and one approximately 3mm wide, with single fingerprint wrapped around the inside.
Finished width has variation because each is handmade.

Check out our Site for more designs:

Please check our policies before ordering, for information about engraving, the current turnaround time, the process by which your ring is made, international orders, rush orders, shipping, and the materials we do and do not work in.

The Fine Print– The design or finish on the exterior of any ring is vulnerable to scratching and wear over any period of time, especially sterling silver. If you are concerned about wear, consider purchasing a ring with the fingerprint on the interior. All of the metals scratch and dent; exterior high polish or brushed finish can be refreshed with polishing or brushing. An oxidized finish allows the details of the fingerprint to stand out by blackening the crevices. Vigorous polishing and cleaning can remove this finish. We stamp our Maker’s Mark and Quality Stamp on all rings–these stamps are not placed on the fingerprint.

Only available from brent&jess, handcrafted by us on the Coast of Maine. These rings are completely custom and are sure to be memorable and lasting.

Please contact us for prices in those metals and include your ring sizes.

New Jan.19, 2012. A Brent&Jess exclusive.

This listing is for one sterling silver hammered 7mm wide fingerprint wedding band with single fingerprint wrapped on the inside.

We are so excited to offer this new design Brent just finished! It is so striking:)

The fourth picture shown NON-Oxidized inside.

Please read our shop policies for information about current turnaround time, the process by which your ring is made, international orders, rush orders, shipping, and the materials we do and do not work in.
http://www.brentjess.com/policies/

The blue image explains the fingerprints we use.

The Fine Print– The design or finish on the exterior of any ring is vulnerable to scratching and wear over any period of time, especially sterling silver. If you are concerned about wear, consider purchasing a ring with the fingerprint on the interior. All of the metals scratch and dent; exterior high polish or brushed finish can be refreshed with polishing or brushing. An oxidized finish allows the details of the fingerprint to stand out by blackening the crevices. Vigorous polishing and cleaning can remove this finish. We stamp our Maker’s Mark and Quality Stamp on all rings–these stamps are not placed on the fingerprint.

Only available from brent&jess, handcrafted by us on the Coast of Maine. These rings are completely custom and are sure to be memorable and lasting.

This is a beautiful way to have your loved ones always with you. Great for anniversaries, Mother’s Day, Valentine’s Day, and birthdays! Also a wonderful representation of a blended family–have us make your fingerprint wedding bands, and a special pendant for the children to seal your new bond.

A lot of our customers buy this for their wedding day as a gift for the parents or children to signify this new bond.

This listing is for a Sterling Silver, custom, handmade to order pendant with 5 fingerprints.

Other pictures show 3 and 2 print family pieces.
Comes with an 18 inch black leather cord with sterling lobster clasp.

We can make this pendant with more prints, just convo us for a more custom design so we can figure out how to fit your whole family on the pendant!

We are happy to hand inscribe the initials of the family members on the back of the pendant for $25

Please let us know if you’d like the print blackened or not, and whether you’d like the print on the inside or outside.

Sterling silver chain is available ($19).

Children under three years old often have very faint prints. We are happy to use a circle of palm or foot texture! Please contact us for details.

Our customers love the experience they have imprinting just as much as the final product!!

***It’s not too late! While we might not be able to get you a finished piece before your special moment (birthday, anniversary), we can get you a fingerprinting kit in 3-4 days! Print out a picture of the piece you’d like, package it up with the imprinting kit, and you have an instant gift! Then you can do the imprinting as a project together. Once you send the kit back, you’ll have your finished piece in 8-10 weeks.***

OR- present the kit at your family gathering and imprint those loved ones of your choice you would love to have with you back home every year! Always with you!!

Pictured with two adults (Mom & Dad- 3 children ages 11, 9 and 5)

This is a beautiful way to have your loved ones always with you. Great for anniversaries, Mother’s Day, Valentine’s Day, and birthdays! Also a wonderful representation of a blended family–have us make your fingerprint wedding bands, and a special pendant for the children to seal your new bond.

As each year passes everyone can look at this meaningful piece to see how little ones have grown or to remember those who are not with us any longer.

Comes with a red ribbon (not pictured) to hang on a branch or anywhere else.

We are happy to hand inscribe the initials of the family members on the back of the ornament for $25

Sterling silver chain is available ($19).